Monthly Archive: October 2003

Closet Mods 101

I live in a two-story house, and so my safe is downstairs. But what about stuff I want quick access to in the night – upstairs? Well, my closet – being four feet from my bed – is a good place. I can lock up my knife and gun collection and not have to worry about the kids getting to them, but secondly, I can use it as sort of a panic room if the need ever arises. Some of the modifications I’ll discuss here were done for mere practicality and storage solutions, while others were done in the interest of being prepared for the worst.

Firstly, and I think one of the key notes in creating a safe house in the closet is to make sure the light switch is inside the door. If this isn’t the case, you will need to move it. I had to move mine. It’s fairly easy. Just measure the exact distance from the jamb to the edges of the rectangular cutout, and replicate that measurement directly the other side of that wall, inside the closet. Make sure your breaker is tripped before you start messing with the wires! If you make the cut right, you can use that piece of sheetrock to fill in the hole on the outside, so don’t destroy it! Once you’ve got the hole cut on the inside, pry the switch box away from the stud and twist it toward the inside of the closet. On the inside, pull the plastic switchbox into the cutout where it’s nice and snug, and screw your switch back in along with the cover plate.

Continue reading…